DIMETIX DLS-C 30 Industrial Laser Measuring Device DLS-C-30

Description

The DLS-C30 Laser Distance Meter is used to measure distances accurately in the industry sector. This Laser Distance Meter can measure for example filling of containers, the position of objects on the conveyor or the thickness of rolls and cilinders, as well as store and evaluate data on the PC. You can connect the Laser Distance Meter to a SPS for handling and reading. The potential uses of the laser distance meter are manifold. The Laser Distance Meter is very easy to install with the help of the M4 and it is fed through the network (9 - 30 VDC). The standard version of this Laser Distance Meter should always be used in connection with a PC. The measurement is activated from the PC or monitor. The measurement values are given in either analogue or digital. To connect the Laser Distance Meter to a PLC, it will not be necessary to use a PC. For this, it must be noted that the SPS has an RS-232 or RS-422 available to serve as a connection to the Laser Distance Meter.
Measurement range
.05 ... 65 m in natural surfaces
.05 ... 150 m with testing target
Accuracy
± 3,0 mm
Resolution
0,1 mm
Measurement time
0,2 s ... 4 s for single measurements
0,15 s for long measurements
laser type
class II (620 - 690 nm)
Diameter of the laser point en mm per meter
from 6 mm to 10 m, 30 mm to 0 m,  60 mm to 100 m
Interface
RS-232 y RS-422
Output
0/4 ... 20 mA
Software
included
Power supply
external  9 ... 30 V DC
Current juack
max 140 mA to 24V
Temperature range
- 10 ... + 50 °C single measurement
- 10 ... + 45 °C continuos measurement
Storage temperature
-40 ºC ... +70 ºC
Display
4 LED
Holder
3 screw M 4
Protection
IP 65
Case
aluminium
Dimensions
150 x 80 x 54 mm
Weight
670 g
https://dimetix.com/wp-content/uploads/2016/08/DLS_FLS_C_TechnicalManual_V204_en.pdf